Howard Reeves

Sat 23 Nov 2013 09:48pm

Kitchen fitter ,any copetent person jus follow the instructions it's all common sense

(1) Was this helpful?

Rafal Kaczynski

Sat 23 Nov 2013 09:22pm

Hi Nicola Any good kitchen fitter should be able to help Best regards Rafal

(1) Was this helpful?

Dave Claringbould

Sat 23 Nov 2013 09:19pm

Kitchen fitter could handle this, if moving electrics involved get a qualified sparks

(1) Was this helpful?

Robert Wade

Sat 23 Nov 2013 09:14pm

Joiner or kitchen knitter, most likely won't need an electrician.

(1) Was this helpful?

Darryl Hoey

Sat 23 Nov 2013 08:00am

Hi Nicola. Just post your request on Rated People and a tradesman will give you a call.

(1) Was this helpful?

Jared Oranin

Sat 23 Nov 2013 12:07am

I agree with Stuart Geddes on the following: Hi Nicola If it is a fresh install then you will need a high level spur switch(For isolation of Fridge) and low level socket (For Fridge Power) installed by a Qualified Electrician, followed by a joiner/ kitchen fitter to install the doors etc. If it is a changeover, this is normally done by a joiner/kitchen fitter. Hope this helps Stuart AV ELECTRICAL (Motherwell)

(1) Was this helpful?

Gordon Eadie

Fri 22 Nov 2013 09:32pm

kitchen fitter would be fine

(1) Was this helpful?

Stuart Geddes

Fri 22 Nov 2013 06:59pm

Hi Nicola If it is a fresh install then you will need a high level spur switch(For isolation of Fridge) and low level socket (For Fridge Power) installed by a Qualified Electrician, followed by a joiner/ kitchen fitter to install the doors etc. If it is a changeover, this is normally done by a joiner/kitchen fitter. Hope this helps Stuart AV ELECTRICAL (Motherwell)

(1) Was this helpful?

David Price

Fri 22 Nov 2013 07:10am

A kitchen fitter would normaly be able to do the job

(1) Was this helpful?

Krzysztof Zieba

Sun 24 Nov 2013 06:23pm

It can do Kitchen fitter or electrician who can test the socket before connect the fridge. Best Chris

Was this helpful?

Virgil Anuta

Sun 24 Nov 2013 09:19am

dear Nicola. You need the electrical part(accesible isolators and electrical points)to be done by an electrical approved contractor or domestic installer. the rest will be done by the competent trade(carpenter,kitchen fitter)

Was this helpful?